大8彩票app

 
​用心做好每一​颗芯片    
​Make every chip with heart
我们专注品质与服务   决胜制高点  细节决定成败
Runoff commanding heights Detail decides success or failure
The commanding heights of
the details determine success or failure

JC32F030x4/x6

0.00
0.00
  

描述

The JC32F030x4/x6 microcontrollers incorporate the high-performance Arm® Cortex®-M0 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (up to 256 Kbytes of Flash memory and up to 32 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (up to two I2Cs, up to two SPIs and up to six USARTs), one 12-bit ADC, seven general-purpose 16-bit timers and an advanced-control PWM timer. The JC32F030x4/x6 microcontrollers operate in the -40 to +85 °C temperature range from a 2.4 to 3.6V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.
The JC32F030x4/x6 microcontrollers include devices in four different packages ranging from 20 pins to 64 pins. Depending on the device chosen, different sets of peripherals are included. The description below provides an overview of the complete range of JC32F030x4/x6 peripherals proposed.
These features make the JC32F030x4/x6 microcontrollers suitable for a wide range of applications such as application control and user interfaces, handheld equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.
  • All features

    • Up to two I2C interfaces

    • Up to six USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection

    • Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames

    • One 16-bit advanced-control timer for six-channel PWM output

    • Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding

    • Independent and system watchdog timers

    • SysTick timer

    • Conversion range: 0 to 3.6 V

    • Separate analog supply: 2.4 V to 3.6 V

    • One 12-bit, 1.0 μs ADC (up to 16 channels)

    • Calendar RTC with alarm and periodic wakeup from Stop/Standby

    • 11 timers

    • Communication interfaces

    • Serial wire debug (SWD)

    • All packages ECOPACK®2


    • All mappable on external interrupt vectors

    • Up to 55 I/Os with 5V tolerant capability

    • 4 to 32 MHz crystal oscillator

    • 32 kHz oscillator for RTC with calibration

    • Internal 8 MHz RC with x6 PLL option

    • Internal 40 kHz RC oscillator

    • Digital & I/Os supply: VDD = 2.4 V to 3.6 V

    • Analog supply: VDDA = VDD to 3.6 V

    • Power-on/Power down reset (POR/PDR)

    • Low power modes: Sleep, Stop, Standby

    • 16 to 256 Kbytes of Flash memory

    • 4 to 32 Kbytes of SRAM with HW parity

    • Core: Arm® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz

    • Memories

    • CRC calculation unit

    • Reset and power management

    • Clock management

    • Up to 55 fast I/Os

    • 5-channel DMA controller